Control Room Monitor Level Control

Forums Forums SQ Forums SQ general discussions Control Room Monitor Level Control

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of tourtelot tourtelot 5 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #106124
    Profile photo of tourtelot
    tourtelot
    Participant

    What do y’all do to create a level control for control room monitors? Do you use a matrix or do you just assign everything to another group?

    Thanks.

    Doug

    #106125
    Profile photo of Mfk0815
    Mfk0815
    Participant

    You can use the Listen bus as a source for your control room monitors. These busses will have the same signal as the PAFL bus but the level ist controlled by the listen level. And you can either assign a soft encoder to the listen level or you change the mixer role so that the master fader will become the fader of the listen bus instead of the main LR bus.

    #106126
    Profile photo of tourtelot
    tourtelot
    Participant

    Yes, your suggestion worked fine. Thanks.

    D.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.