Control Mixout Channels with LR faders

Forums Forums Qu Forums Qu general discussions Control Mixout Channels with LR faders

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of garyh garyh 2 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #102411
    Profile photo of courtcourt
    courtcourt
    Participant

    So I’m working with a QU 32 and I have my LR as the main loudspeakers, then mixouts for the floor audience speakers, subs, and stage monitors.

    Basically, mics are loudest through the LR channel and stage monitors, and music is loudest through the audience speakers, but there is some level of both through all of them. I’m wanting to be able to control a fader, say Ch 10 on LR and have it also control Ch 10 on my mixouts relative to where I set them on each mixout.

    #102412
    Profile photo of garyh
    garyh
    Participant

    Set channel 10 in your mix to “Post Fader”. Select Mix 10, hold the Pre Fade button down at the far left, and toggle the Sel key on channel 10 so it’s not lit (post fader).

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.