Connections on DX Hub

Forums Forums SQ Forums SQ general discussions Connections on DX Hub

Tagged: ,

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Flo84 Flo84 3 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #69658
    Profile photo of Art
    Art
    Participant

    1. Can you connect multiple AR2412’s to an SQ via a DX Hub?

    1. Can you connect an AR2412 on one connection of the DX Hub and a DX168 on another connection?

    Thanks.

    Art

    #69660
    Profile photo of DavidCo
    DavidCo
    Participant

    1. No, you cannot connect ARs to DXHub, as they work at different sample rates. You can use up to 8 DX168s (in 4 cascades of 2) with DXHub.

    DC

    #69685
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Can you connect DX hub to the built-in SLink port or only to one in expansion card?

    #69688
    Profile photo of Flo84
    Flo84
    Participant

    Yes DX Hub to the built-in S-Link port.

    All connections who are supported with the 1.2.0 firmware version are available here :
    http://www.allen-heath.com/media/SQ6_SLinkConnections_V1_2_0.pdf

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.