Connecting Simplest way external effects for q pac

Forums › Forums › Qu Forums › Qu general discussions › Connecting Simplest way external effects for q pac

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Alex A&H Alex A&H 4 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/11/04 at 8:12 pm #87456
    Profile photo of Johnny C
    Johnny C
    Participant

    Need to know the simplest way for me to connect my external delay unit to my q pac only going to use on live vocals thanks , not going to use the internal effects

    2019/11/05 at 9:17 am #87462
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi Johnny,

    Here is the best way to do this: https://support.allen-heath.com/Knowledgebase/Article/View/1167

    Unfortunately, it’s not possible to not use a mix bus for this, but as you have the Qu-Pac, you could add a dSnake exapander to gain the use of more mix buses – Groups in Mix mode for example.

    Thanks!
    Alex

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.