Connecting 3 racks

Forums Forums dLive Forums dLive General Discussions Connecting 3 racks

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of SteffenR SteffenR 5 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #82695
    Profile photo of Thomaslamb
    Thomaslamb
    Participant

    We are doing a FOH, Monitor, Broadcast setup each with its own DM or CDM. I realize each DM needs an additional gigs ace card in order to share information. My setup will be as follows

    CDM 1 (FOH)
    Giga ace card (interconnects DM2)

    DM2 (MONITORS)
    GIGA ACE 1 (interconnects CDM1)
    GIGA ACE 2 (interconnects DM3)

    DM3 (BROADCAST)
    GIGA ACE (interconnects DM2)

    Will I be able to tie line from CDM1 to an output on DM3? Send stems from FOH to broadcast?

    #82706
    Profile photo of SteffenR
    SteffenR
    Participant

    yes, it will be possible
    but you have to do some routing on all three systems

    otherwise it is possible to link them with Dante, then you can route in Dante independent from the consoles

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.