Connect qu-24 to an iMac

Forums Forums Qu Forums Qu general discussions Connect qu-24 to an iMac

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 22 hours, 43 minutes ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #122855
    Profile photo of vince86
    vince86
    Participant

    Hi all,

    At our school we connect our qu-24 to the iMac using the headphone jack on the iMac via a 3.5mm jack to the st3 connections on the mixer.

    I am wondering if this is best solution as I need to replace the cable so wanted to check if this was the most effective way to connect a computer to a mixer to play audio from the pc.

    Thanks in advance

    #122902
    Profile photo of Mike C
    Mike C
    Participant

    That will work, just to check are you using a 3.5mm break out cable that goes to
    two 1/4 inch TS mono plugs?

    You could the USB B connection on the back of the mixer with a cable plugged into the iMac USB jack.
    The QU24 will show up as a sound card to the iMac.

    In the IO patch menu the USB can be assigned to a channel on the mixer.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.