Computer audio to QU-PAC output

Forums Forums Qu Forums Qu DAW integration Computer audio to QU-PAC output

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of HUMC43324 HUMC43324 3 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #106535
    Profile photo of script
    script
    Participant

    Hi, Most mixers, if not all, with integrated audio interface have common function – posibillity route computer audio to Main(or any other) Out. So how can I do that on QU-PAC? I tried it on patch in/out section, but it won’t work.

    Just in case, I want to send audio from ZOOM or just windows audio (not specific DAW) to QU-PAC output, so there are probably restrictions.

    #106536
    Profile photo of Scott
    Scott
    Participant

    On ST3 set the source as USB-B (not Q-Drive). Computer audio should then come up on the ST3 channel.

    #106537
    Profile photo of script
    script
    Participant

    Ok, Thanks, Scott.

    #106624
    Profile photo of HUMC43324
    HUMC43324
    Participant

    I have a similar question.

    We are using a QU-32 at our church. We have a PC with a DAW on it, that is fed back to the board via USB cable.

    I would like to be able to plug headphones into the QU-32 and listen to the post output from the PC/DAW.

    Can you help me with this?

    Thanks in advance for your help!!

    #106630
    Profile photo of Scott
    Scott
    Participant

    PAFL ST3 should do the trick provided that you are returning a stereo mix back to the Qu from the PC.

    #106642
    Profile photo of HUMC43324
    HUMC43324
    Participant

    Thank you!

    I will check it out.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.