Clicks on channels with fast Gate settings

Forums Forums SQ Forums SQ troubleshooting Clicks on channels with fast Gate settings

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Gab Gab 4 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #83349
    Profile photo of Valentyn L
    Valentyn L
    Participant

    Hello,

    SQ-7. Firmware V1.3.2
    There are disturbing clicks found on drum channels with Gate Library program “Drums Gate” loaded.
    After investigation I found that issue is reproducible with default settings of Gate Attack = 50 microseconds.
    Problem has gone after increasing of Attack value to 80-100 microseconds.

    It’s not a big problem and workaround is found, but possible current issue needs to be investigated by A&H programmers/engineers.

    Thank you!
    Val.

    #83351
    Profile photo of Ethix
    Ethix
    Participant

    Clicks on gates with a too fast attack time are normal reduce the range or slow the attack

    #83417
    Profile photo of Gab
    Gab
    Participant

    yes, every gate with that fast attack times does that

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.