Channel routing screen Qu-24

Forums › Forums › Qu Forums › Qu general discussions › Channel routing screen Qu-24

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of cornelius78 cornelius78 9 years, 10 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2014/06/02 at 8:29 pm #40029
    Profile photo of skippy
    skippy
    Participant

    Just have to say I am loving this mixer but still learning all the ins and outs before taking to our first gig, Just wonder what impact the Direct out Trim settings has. I listen to the LR Mix and adjust it without any considerable change or basically none? What is it actually controlling? I am a little confused?

    2014/06/02 at 10:03 pm #40031
    Profile photo of cornelius78
    cornelius78
    Participant

    The direct out trim changes the channel’s level (post gain,) that is sent to qu-drive/computer connected via USB-b port for multitrack recording. It doesn’t affect LR/mix1-10.

    2014/06/02 at 10:07 pm #40032
    Profile photo of skippy
    skippy
    Participant

    Got it! Thank you for the quick response.

    2014/06/03 at 3:08 pm #40057
    Profile photo of Dwight
    Dwight
    Participant

    If I am not mistaken the direct out Trim it does not work on USB or Qu-drive only on in ear monitor feed through the D-snake.

    Dwight

    2014/06/03 at 11:33 pm #40062
    Profile photo of cornelius78
    cornelius78
    Participant

    Sorry, my mistake. The manual mentions the direct outs feeding the usb bus, so I thought the direct out trim levels would also affect the levels sent to the bus. My apologies.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.