Channel Label of I/O-Ports

Forums › Forums › dLive Forums › dLive feature suggestions › Channel Label of I/O-Ports

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of tmdarlan tmdarlan 5 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2018/10/25 at 8:55 am #79529
    Profile photo of malfmalmquist
    malfmalmquist
    Participant

    I’m missing a feature, where the respective I/O-Port on either surface or mixrack labels its ins and outs respectively to the card installed.
    For example, if you have a Waves V3-Card installed, the channels could be named “wav1”, “wav2” an so forth, or on Dante “DNT1” or similar. It would make patching (especially in larger projects with a lot of routing to different I/O-Ports) much easier and controllable / failproof.

    2018/10/29 at 11:53 pm #79639
    Profile photo of tmdarlan
    tmdarlan
    Participant

    its been requested. really looking forward to this happening.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.