Channel Insert Position is an Issue.

Forums Forums SQ Forums SQ feature suggestions Channel Insert Position is an Issue.

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of TimmyP TimmyP 2 years, 1 month ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #105687
    Profile photo of TimmyP
    TimmyP
    Participant

    With the kind assistance of the community, I found how to change the channels’ monitor send tap points. The choices are:

    Post Preamp = signal is affected only by the preamp gain.

    Post Insert Return = signal is also affected by HPF, gate and insert.

    Post EQ = signal is also affected by PEQ.

    Post Delay = signal is affected by all channel processing including ms delay.

    The problem now is that – according to the block diagram – if I want a monitor tap to be post EQ, it’s also post Insert, which is a big problem if the insert is a comp. The insert position needs to be changeable. Lesser consoles offer this.

    Also, there needs to be taps that are post HPF and post Gate.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.