Channel insert in IO matrix

Forums › Forums › SQ Forums › SQ feature suggestions › Channel insert in IO matrix

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Ya-Neck Ya-Neck 5 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2019/01/05 at 6:51 am #81250
    Profile photo of Ya-Neck
    Ya-Neck
    Participant

    Hello,

    I would like to be able to plug external devices to my SQ as inserts lets say for example an analog compressor. I’d activate the insert on my channel, then go to the IO matrix select the output insert tab and output it where i would need it. Be it local io, Slink io, addon cards io or usb io. Then i’d go into the input insert tab and select where it comes back from. Which would route the signal back to my original channel.

    2019/01/05 at 8:24 am #81252
    Profile photo of Ya-Neck
    Ya-Neck
    Participant

    Well. Sorry about this post. I hadn’t updated my sq5 to the latest firmware, and now i see this feature is available. Forget about it. Thanks.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.