channel gain in fader

Forums Forums CQ Forums CQ General Discussions channel gain in fader

This topic contains 7 replies, has 5 voices, and was last updated by Profile photo of Lee7 Lee7 2 months, 1 week ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #118874
    Profile photo of Radiohead
    Radiohead
    Participant

    Is there a quick way to set channel gain to 0dB?

    #118875
    Profile photo of willmodelisme
    willmodelisme
    Participant

    You mean to bring the channel fader to 0db with the touch of one button ?

    #118876
    Profile photo of Radiohead
    Radiohead
    Participant

    Yes

    #118877
    Profile photo of willmodelisme
    willmodelisme
    Participant

    Not natively via the console nor the app.
    I manage to do so with the use of mixing station on a PC, and a midi controller that is programmed to send a midi not ON value of 94 to the selected channel.

    #118882
    Profile photo of Radiohead
    Radiohead
    Participant

    Yes, I thought it could be done. I will get Mixing Station which extends the facilities of the mixer. Thanks for the tip.

    #118883
    Profile photo of Mike C
    Mike C
    Participant

    Not sure I would want a quick easy way to bump a channel level to 0db, could be an accident waiting to happen.

    #119327
    Profile photo of Tommy
    Tommy
    Participant

    Guys need help , in cq12t I have channel banks 1-5 on first tab , but need to put channel 6 and the usb channels next to the 1-5 on the first tab, there are three empty slots , how do i move channels to another bank?

    #119337
    Profile photo of Lee7
    Lee7
    Participant

    @Tommy,

    You can’t, check out the Mixing Station app as you can customise that to your own personal needs. Unlike the QU and SQ series, there are no custom layers on the CQ, yet.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.