Channel compressor pre/post eq

Forums Forums SQ Forums SQ feature suggestions Channel compressor pre/post eq

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Brandon Brandon 3 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #68506
    Profile photo of Brandon
    Brandon
    Participant

    I really would love to see the compressors made pre or post eq switchable in the signal path. The m32 and x32 have this feature and is a huge life saver when running monitors from FOH. I run my auxes pre pre and it’s essential for my channel compressor to also compressor that channel being sent to my wedges. I prefer this much more than over all compression on my mix outputs.

    #68529
    Profile photo of Wolfgang
    Wolfgang
    Participant

    for each mixbus there is the possibility to set the pickup point:

    – Post Preamp
    – Post Insert
    – Post PEQ (= Pre Compressor)
    – Post Delay (= Post Compressor)

    #68531
    Profile photo of Brandon
    Brandon
    Participant

    When placed in “post ins return, the conpressor does not affect the sends to the mixes from a channel. It only affects it when in “post delay”

    #68532
    Profile photo of Brandon
    Brandon
    Participant

    Actually it affects in it “post eq” also. Post insert return setting for the mix output receives only the hpf gate and insert. No compressor

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.