Channel Assignment Config Question

Forums Forums GLD Forums GLD general discussions Channel Assignment Config Question

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of SteffenR SteffenR 5 months, 2 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #97913
    Profile photo of P.Brad
    P.Brad
    Participant

    Hi. I’m new to the forum. We have a GLD-112 for FOH audio and another one for livestream/recording audio. Currently the stereo audio signal from our iMac running ProPresenter 7 is sent to the livestream audio console, then down to the FOH console where it comes in as 47/48, but in one channel. We’d like to experiment with running our stereo tracks (click left/mix right) from ProPresenter 7, but with the current config, we can’t split the click from the mix, which causes obvious problems. How can I get channels 47 & 48 to be separate when they arrive at the FOH audio console? Is there a tutorial to watch, or an answer short enough to share here? Thanks for considering.

    #97914
    Profile photo of P.Brad
    P.Brad
    Participant

    I’ll try these smaller files. Sorry.

    Attachments:
    You must be logged in to view attached files.
    #97921
    Profile photo of SteffenR
    SteffenR
    Participant

    patch them to different inputs is just one possible solution

    #97933
    Profile photo of P.Brad
    P.Brad
    Participant

    Thanks SteffenR. I took a look at it and cannot find how to separate 47/48 at the Livestream Audio Console. 🙁

    #97936
    Profile photo of SteffenR
    SteffenR
    Participant

    you can’t separate the processing channels 47/48
    but you can patch your I/O port sockets to other channels

    #97938
    Profile photo of SteffenR
    SteffenR
    Participant

    made a quick example in GLD Editor

    Attachments:
    You must be logged in to view attached files.
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.