Changes in Qu Chrome Version

Forums Forums Qu Forums Qu general discussions Changes in Qu Chrome Version

This topic contains 7 replies, has 6 voices, and was last updated by Profile photo of Studiodawg Studiodawg 4 years, 6 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #58693
    Profile photo of jakethepeg
    jakethepeg
    Participant

    Aside from chrome knobs, what else changed when the Qu range upgraded to the Chrome version?

    #58696
    Profile photo of Lee7
    Lee7
    Participant

    Nothing.

    #58701
    Profile photo of DoctorG
    DoctorG
    Participant

    Perhaps not pertinent, but I believe the 1.9 firmware update happened about the same time.

    #58702
    Profile photo of David Haughton
    David Haughton
    Keymaster

    @jakethepeg – Hi Jake, Qu Chrome introduced the chrome pot and fader caps from GLD for higher contrast controls in low light operation and firmware version 1.80 ‘Chrome’ which included –

     Automatic Mic Mixer (AMM) for conference speech control
     Mix mode for Stereo Groups for more monitor sends (Qu-24/32/Pac)
     Spectrogram
     Admin user password now affects Qu-Pad app login
     Qu-You user password set at the mixer for Qu-You app login
     Audio setup, AMM, linking, routing and matrix functions added to the Qu-Pad app
     High Pass Filter (HPF) slope increased from 12 to 18dB/octave
     Reset default for Scene Global Filter now blocks Custom Layer and SoftKey settings
     LR routing function assignable to the Qu-Pac Qu-Control screen
     Qu-Pac reset default for CH17-32 source is dSNAKE 1-16

    Otherwise, no internal hardware changes were made.
    Hope this helps.

    Cheers.
    Harry.

    #58708
    Profile photo of DoctorG
    DoctorG
    Participant

    Thanks, Harry, for the clarification and other details. The firmware update was 1.8, not 1.9. I’m old, and my memory is somewhat faulty!

    #58711
    Profile photo of jakethepeg
    jakethepeg
    Participant

    Thanks for all of the responses. That clarifies it!

    #58714
    Profile photo of Tony
    Tony
    Participant

    So if i update firmware from v1.73 to 1.9 will i have all the goodies u just mentioned jake

    #58715
    Profile photo of Studiodawg
    Studiodawg
    Participant

    Yes. If you use Qu-Pad you’ll need to make sure it’s firmware 1.9x as well.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.