Change pad from 20db to 10db?

Forums Forums SQ Forums SQ general discussions Change pad from 20db to 10db?

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Phil Driscoll Phil Driscoll 1 month, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #121358
    Profile photo of unclejemima
    unclejemima
    Participant

    We’re looking for an easy way for out less experienced sound techs to give a quick 10db cut to a track via a soft key. Right now the only way I’ve found to do this is via assigning the PAD to a soft key for an input.

    But the pad is a 20db cut.

    Is it possible to change the system value for pad from -20db to -10db?

    Thanks!

    #121359
    Profile photo of Phil Driscoll
    Phil Driscoll
    Participant

    I strongly suspect that the 20dB is intimately associated with a resistor network in the pre-amp. I’m not quite sure what you’re after that can’t very easily be achieved by turning the gain control anticlockwise, which I think is the universal way of doing things.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.