Cant get more than 8 aux outputs

Forums Forums SQ Forums SQ troubleshooting Cant get more than 8 aux outputs

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Scott Scott 1 month, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #101931
    Profile photo of Patrick
    Patrick
    Participant

    My SQ-5 offers me up to 12 aux outs. If I choose above eight, the groups disappear, and I dont get an “aux 9”, and the channels to go dark. If I choose more than four groups, my auxes disappear. and their channels go dark. This is driving me nuts. I am trying to achieve 12 auxes and no groups. Any help would be great. Thanks

    Attachments:
    You must be logged in to view attached files.
    #101936
    Profile photo of Mfk0815
    Mfk0815
    Participant

    The groups just disappear from the layer. You can add the remaining auxes to the desired layer using the strip assign screen.

    #101937
    Profile photo of Scott
    Scott
    Participant

    As @mfk0815 pointed out, you are only looking at the strip assignments. Don’t confuse those with how the desk is internally configured, as they are totally independent from one another. Configure the number of auxes and groups needed along with stereo channels, then configure the strip assignments.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.