Cannot connect Director and Mixrack with v1.85

Forums › Forums › dLive Forums › dLive troubleshooting › Cannot connect Director and Mixrack with v1.85

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Brian Brian 3 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2020/07/22 at 12:20 pm #93549
    Profile photo of Brian
    Brian
    Participant

    I have just updated everything to 1.85 and now director and the mixrack will not connect. All the IP addressing is correct but it just hangs for a minute then fails to connect.

    Anyone else experience this or have suggestions?

    2020/07/22 at 3:17 pm #93552
    Profile photo of SteffenR
    SteffenR
    Participant

    can you see the name of the mixrack?

    2020/07/23 at 8:20 am #93573
    Profile photo of Brian
    Brian
    Participant

    Yes the mixrack name shows up with its default IP address

    2020/07/23 at 8:52 am #93574
    Profile photo of D3F
    D3F
    Participant

    Do you have other network devices connected to the Surface/mixrack (for example, router)?
    Try to connect by Network ports at both devices instead of GigaAce.

    2020/07/23 at 12:35 pm #93584
    Profile photo of Brian
    Brian
    Participant

    Reset the network adapters and rest everything which seems to have fixed it.

    Thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.