Can you monitor Aux outputs on headphones?

Forums Forums SQ Forums SQ general discussions Can you monitor Aux outputs on headphones?

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 1 week, 5 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #105293
    Profile photo of LAH2420
    LAH2420
    Participant

    We have an SQ7 in a church setting. I was not in on the setup, but have inherited the operating of it. There is a monitor amp connected to the Aux1 output, which is channeled through the S-Link. It is used only for special music involving tracks and soloists or duets at times. At this time I have to go to the speakers to check on balance. Is there a way to send the Aux1 output to the headphones as well as the S-Link?

    #105296
    Profile photo of Phil Driscoll
    Phil Driscoll
    Participant

    Just switch to Aux 1 with the buttons down the right hand side, and hit the pafl button above the main fader.

    #105372
    Profile photo of davfo
    davfo
    Participant

    Also,
    if you leave the PAFL button on (above the mail out fader) , you caan go through all the aux’s and the headphones will give you that aux,, when you go back to L/R the headphones will hear the L\R mix

    #105383
    Profile photo of Mike C
    Mike C
    Participant

    if you leave the PAFL button on (above the mail out fader) , you caan go through all the aux’s and the headphones will give you that aux,, when you go back to L/R the headphones will hear the L\R mix

    If you want to you can turn off the follow mix option in the PAFL set up menu so after selecting PAFL on Mix 1 it will stay with with Mix 1 regardless of any other mix selection until you manually select PAFL on another mix or channel.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.