Can QU do multitrack recording of the mix outputs?

Forums › Forums › Qu Forums › Qu general discussions › Can QU do multitrack recording of the mix outputs?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2016/01/09 at 7:45 pm #53187
    Profile photo of MbirameMbirame
    Participant

    Hi folks,
    I’m a bit confused, I have been trying to do multitrack recording of the QU-16 but all I want to do is record all the mix outputs and the LR output. I have tried and I’m just getting the individual input channels-I think post fader.

    Is that possible to record only mix outs?

    2016/01/09 at 8:07 pm #53188
    Profile photo of Dick ReesDick Rees
    Participant

    User manual > I/O Patch Setup-USB Audio

    2016/01/09 at 9:45 pm #53189
    Profile photo of MbirameMbirame
    Participant

    Thanks. I’m seeing my problem. I thought I had set that USB Audio routing correctly, but as scenes change, that routing is going back to the default. I have to dig in to just figure out how to keep that from changing. Probably some “safes” thing. Thanks again.

    2016/01/09 at 10:51 pm #53190
    Profile photo of MbirameMbirame
    Participant

    ok-I got it sorted. I had to turn on Output Patch->Block on Global Filters after setting the routing the way I needed it to be. Now scene changes will not reset the routing.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.