Can I split the signal to the ME-1?

Forums › Forums › ME Forums › ME general discussions › Can I split the signal to the ME-1?

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of TimothyGa TimothyGa 6 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2017/11/25 at 2:45 am #66505
    Profile photo of TimothyGa
    TimothyGa
    Participant

    At the present time, we are using a QU32 at our church. We have an ME-1 in the video booth about 80’ away for mixing audio for a video recording. It is connected directly to the QU32 with a CAT5 cable.

    I am thinking of purchasing a POE hub (which will be mounted in the amp rack backstage) and 6 ME-1’s for our band. The wiring is already in place from the sound booth to the amp rack and from the amp rack to the stage from a Hearback system that we once used.

    Question: can I split the signal right out of the back of the QU32, so that I don’t have to run a CAT5 cable from the POE hub back to the video booth? If so, what do I need?

    2017/12/07 at 2:53 pm #66735
    Profile photo of TimothyGa
    TimothyGa
    Participant

    Yes, you can.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.