bypass all channel processing

Forums Forums SQ Forums SQ feature suggestions bypass all channel processing

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of guma guma 3 years, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #73399
    Profile photo of mumu
    mumu
    Participant

    one function only: bypass all channel processing (just processing)
    would be cool. for real micpreamp check, if one has a prepared virtual mix.
    explanation:
    i get a multichannel project from a band to prepare a mix,
    as the recording levels are sometimes strange (normalised,very low recording level e.t.c.)
    i definetely have to make a gain preamps check,once live,therefore i d like to bypass all the processing while doing this.

    #73427
    Profile photo of jakethepeg
    jakethepeg
    Participant

    Yes please (for Qu too)

    #73430
    Profile photo of guma
    guma
    Participant

    Good idea but not as simple as it seems to be. I tried to simulate it in the DiGiCo Macro Editor:
    Implementing a common ‘off action’ to a selected channels high pass/low pass, equalizer, compressor and gate is simple but … there is no ‘undo’ option so if you programm an ‘on action’ all processing stages go to ‘on’ even those not choosen before, and if you programm a ‘toggle’ action all those beeing unactive before go to active and vice versa.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.