Bug V1.20: Opto Gain not shown correctly

Forums Forums Avantis Forums Avantis troubleshooting Bug V1.20: Opto Gain not shown correctly

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of davidgiga1993 davidgiga1993 1 week, 3 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #107684
    Profile photo of davidgiga1993
    davidgiga1993
    Participant

    See screenshot, gain of opto comp (and 16T) doesn’t match what’s shown on the assignable knobs

    Firmware/Director V1.20

    Attachments:
    You must be logged in to view attached files.
    #107699
    Profile photo of Jamie
    Jamie
    Participant

    Is it always stuck that distance off or does it jump back to correct when you move the assignable know? Cuz I have a similar problem on 1.03 with aux send on a channel that if I load a scene where there is nothing sending, it will default to -40dB on the assignable while showing -inf on the aux mix but when I move either one the other corrects itself.

    #107704
    Profile photo of davidgiga1993
    davidgiga1993
    Participant

    The label of the knob is just wrong, the knob position correctly follows the knob position of the gain

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.