BT and CQ4YOU on same device?

Forums Forums CQ Forums CQ troubleshooting BT and CQ4YOU on same device?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Evorgeloc Evorgeloc 3 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #118450
    Profile photo of Evorgeloc
    Evorgeloc
    Participant

    It seems if I stream music via blue tooth from iPhone to CQ18T then CQ4YOU (on same iPhone) disconnects and won’t reconnect while BT is connected… Is that just how it is? Message is “Lib timed out” I’d be interested to hear from others experiencing the same or not. Work around is ST in… just trying to avoid cables 🙂

    Attachments:
    You must be logged in to view attached files.
    #118461
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @evorgeloc

    We have had reports of some devices which don’t like to be connected to the same thing via 2.4GHz WiFi and Bluetooth at the same time.
    As described here – https://discussions.apple.com/thread/252621964?sortBy=best
    Just as mentioned in that thread, Bluetooth runs in/across the 2.4GHz range so the first thing to try is simply switching the CQ WiFi to 5GHz.

    This is also noted in the following article (which is more about the Bluetooth connection) – https://support.allen-heath.com/hc/en-gb/articles/20019096131601-Troubleshooting-Bluetooth-Connectivity

    Hope this helps!
    Keith

    #118462
    Profile photo of Evorgeloc
    Evorgeloc
    Participant

    Thank you Keith – I’ll give the 5ghz a go 👍🙏

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.