Background Music Playback

Forums › Forums › SQ Forums › SQ general discussions › Background Music Playback

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Showtime Showtime 6 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2018/02/22 at 9:40 am #69117
    Profile photo of RonnieD
    RonnieD
    Participant

    Hi All

    I have WAV Files on my Sq drive USB for background music and only three of the 12 on there will play. Is there a particular format of WAV I should be using although all of these tracks are 44khz 16bit stereo

    All help appreciated.

    Ronnie

    2018/02/22 at 1:04 pm #69120
    Profile photo of Andrien
    Andrien
    Participant

    Are you sure it is 44khz? Most AH mixer only support 48khz (and probably 96khz for SQ) for WAV files.
    Check this link (tho it is for QU, I think it applies to SQ too except for 96khz)
    https://support.allen-heath.com/Knowledgebase/Article/View/774/0/understanding-qu-drive-and-usb-devices

    2018/02/22 at 2:54 pm #69125
    Profile photo of RonnieD
    RonnieD
    Participant

    Thanks a million, I have converted the files to 48k and will try it tonight.

    Thanks a million

    Ronnie

    2018/02/23 at 10:01 pm #69154
    Profile photo of Showtime
    Showtime
    Participant

    From the reference guide:

    These can be mono or stereo, uncompressed PCM *.wav files, 44.1, 48 or 96kHz and 16 or 24-bit.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.