AVANTIS & SHURE

Tagged: 

This topic contains 25 replies, has 12 voices, and was last updated by Profile photo of Kevg Kevg 1 year, 10 months ago.

Viewing 11 posts - 16 through 26 (of 26 total)
  • Author
    Posts
  • #106172

    How is it communicating with the Shure products? Via the control network for the board or through Dante?

    Reason I ask is we didn’t go the Dante route for now until those products are more readily available so we have the A&H I/O and no Dante card…

    Either way, great news and another item checked off the list for a lot of A1’s.

    #106174
    Profile photo of Riodigital
    Riodigital
    Participant

    Wow! Wonderful news!

    Thank you!!!’

    #106176
    Profile photo of Scott
    Scott
    Participant

    How is it communicating with the Shure products?

    Via the control network, if it’s like dLive.

    #106183
    Profile photo of Scott
    Scott
    Participant

    P.S. I’m not sure if you switch on the BRIDGE on the Dante card whether it will also bridge Shure control data over the Dante network or not. Maybe Jack, Nic or someone at A&H can tell you that specifically. I’ve never tried that before.

    #106193
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Yes, you can use the network bridge on the Dante card. Jack will post a tutorial video in the next few days, but in the meantime, you can reference the dLive-Shure guide: https://www.allen-heath.com/media/dLive-Shure-Integration-Guide-ISS1.pdf
    All the advice in this document applies to Avantis too.

    #106215
    Profile photo of jschroeder
    jschroeder
    Participant

    Is there any plans for Sennheiser integration?

    #106218
    Profile photo of Clemens
    Clemens
    Participant

    Perfect Thank‘s

    #106233
    Profile photo of Kevg
    Kevg
    Participant

    Thank you

    #106412
    Profile photo of hedgehog
    hedgehog
    Participant

    ULXD integration is working great so far, thanx A&H!

    #106437
    Profile photo of Brian
    Brian
    Participant

    Is there any plans for Sennheiser integration?

    They won’t officially comment, but Sennheiser is now supported on the DLive system and it is expected to come to the Avantis line was well. The real question is how long before it hits and we won’t have an answer for that until it is released (or at least very close to release).

    #107216
    Profile photo of Kevg
    Kevg
    Participant

    Did Jack post a tutorial video? Can’t find it on your feed.

Viewing 11 posts - 16 through 26 (of 26 total)

You must be logged in to reply to this topic.