Avantis, GX4816 and ME1's

Forums › Forums › ME Forums › ME troubleshooting › Avantis, GX4816 and ME1's

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 2 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2021/05/11 at 12:04 pm #101254
    Profile photo of Slammin
    Slammin
    Participant

    Hi,

    We have a set up of Avantis or an SQ5 going into a GX4816 and then from that feeding a POE hub and 6x ME1’s. On the GX unit we are getting an intermittent error light on the link light no matter what desk is used. Oddly though audio still passes through and the ME’s still function as expected (it grabs the names and everything)- its just really annoying seeing a flashing red light. Any ideas as to the cause?

    2021/05/11 at 6:05 pm #101265
    Profile photo of SteffenR
    SteffenR
    Participant

    Watch the logfiles?

    2021/05/12 at 7:48 am #101280
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Slammin,
    Presumably you have already ruled out cables? Test with a short STP cable if you have a chance.
    Does the error light persist if you remove the switch and connect a ME-1 directly to the GX4816?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.