Avantis – Dante Gain Setting For Daw

Forums Forums Avantis Forums Avantis troubleshooting Avantis – Dante Gain Setting For Daw

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 3 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #99430
    Profile photo of Buzznewman
    Buzznewman
    Participant

    Hey, so im needing to adjust my gain sent to my DAW from our Avantis –> Dante –> DAW.
    How abouts might i go about adjusting these levels? (We purchased the Luke Hendrickson Template from Productiononline.com and the template requires audio stems to hit a certain gain level in order to work with template correctly with gates, compressors, etc.)

    #99432
    Profile photo of SteffenR
    SteffenR
    Participant

    What you mean with “purchased a template”?

    #99434
    Profile photo of Brian
    Brian
    Participant

    This gain is set at the preamp level. The standard is to look at your meters and set the channel gain to average at the high green – just peaking into the yellow on loud parts. If you do this, I suspect your DAW settings will work as expected.

    #99458
    Profile photo of SteffenR
    SteffenR
    Participant

    What you mean with “purchased a template”?

    Never mind…found it myself… what a rip off, I’m shocked
    a ProTools template for $500
    and what he is promising

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.