AR2412 Help

Forums › Forums › Qu Forums › Qu feature suggestions › AR2412 Help

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2014/01/21 at 8:39 pm #37294
    Profile photo of Anonymous
    Inactive

    Hello. QU-16 was bought two months ago.
    I would like to buy AR2412, but have a few questions. . Can somebody tell.
    Is there a possibility of using the AR2412 to switch the input routing when switching scenes. For example, in the first scene are used QU-16 channels, and the second scene uses the channel of AR2412, in the third scene uses a part of the channels of QU-16 and channels of AR2412.
    Thank you.

    2014/01/23 at 7:25 am #37321
    Profile photo of Nicola A&HNicola A&H
    Keymaster

    Hi Andrew,

    Yes the channel source selection is stored / recalled with scenes.

    Hope this helps.

    2014/01/24 at 7:20 pm #37380
    Profile photo of Anonymous
    Inactive

    Hi Nicola
    Thank you for your help. I’ll try.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.