AMM Eq bypass?

Forums › Forums › dLive Forums › dLive troubleshooting › AMM Eq bypass?

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of Loloverde Loloverde 5 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2018/10/14 at 11:34 am #79256
    Profile photo of Loloverde
    Loloverde
    Participant

    Howdy

    For the first time I tried the AMM in the dLive.
    Could it be that the EQ of a channel is bypassed when the channel is switched on?
    This occured now two times. But only on channel two (second channel on the mixrack and the AMM).

    Bye
    Rainer

    2018/11/15 at 3:55 pm #80113
    Profile photo of Loloverde
    Loloverde
    Participant

    Howdy

    Found it. The error was in front of the desk 😉
    “AMM Input to PFL source select” was Post Preamp. So under the headphone the EQ wasn’t working, but otherwise it was working.

    bye
    Rainer

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.