AMM configurable Out´s

Forums › Forums › dLive Forums › dLive feature suggestions › AMM configurable Out´s

Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2019/03/13 at 10:37 pm #82633
    Profile photo of AngelAngel
    Participant

    In the I / O patch can select the outputs of the various configurations of the AMM.

    For exampe, if seleccion TWO AMM in the setup, the I/O can be LR that first AMM and LR to the second AMM.

    2019/03/14 at 9:43 am #82668
    Profile photo of SteffenRSteffenR
    Participant

    what is the request? I don’t understand…

    you can still use the channels for routing and processing

    2019/03/14 at 6:08 pm #82682
    Profile photo of AngelAngel
    Participant

    Yes, that the AMM work as zones or independent.

    2019/03/14 at 6:50 pm #82684
    Profile photo of AngelAngel
    Participant

    +1

    Attachments:
    You must be logged in to view attached files.
    2019/03/15 at 12:18 pm #82709
    Profile photo of SteffenRSteffenR
    Participant

    the AMM does not route any audio…
    routing depends on the channels

    so if you need different zones it’s easy to route the channels from one AMM to a subgroup
    and route this subgroup to a matrix for a dedicated zone

    you now have the possibility to use 4 complete automixers
    wich send their signals to a single zone

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.