Alt Out Knob

Forums Forums Qu Forums Qu general discussions Alt Out Knob

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Hawk Hawk 7 years, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #42353
    Profile photo of Hawk
    Hawk
    Participant

    What is the dimension of the value marked on the Alt-out knob? (0-10) Since it’s a line level output, how do I set to 0dB? Unlike headphone output where it is driven by a headphone amp. Should this Alt-out knob be marked differently so users can set to a more precise level?

    #42363
    Profile photo of BruceMc
    BruceMc
    Participant

    There is a little tick mark that is different from the others at about number position 7 or 2:00 o’clock. I had assumed that was unity.

    #42364
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    I also assume that that is unity – the only reference to levels in the manual is
    “Stereo ‘alternative’ output on balanced TRS jacks for connection to +4 or 0dBu equipment such as zone feeds, fill speakers, broadcast or local monitor”

    #42368
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    You can see the tag we’re talking about at “position 7” on this A&H picture:
    A&H QU16 Alt Out knob

    #42410
    Profile photo of Hawk
    Hawk
    Participant

    Thank you! I didn’t even see that. That’s the detail I’m talking about.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.