AFPL bug (pan)

Forums Forums dLive Forums dLive troubleshooting AFPL bug (pan)

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Scott A&H Scott A&H 6 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #52669
    Profile photo of hisen

    When the AFPL IEM (controlled by fader) is patched to Mixrack outputs the pan/balance function doesn’t work correct. For example if I pfl a stereo aux and change the pan of a channel sent to the aux the pan follow correctly when panned to the left but when panned to the right there is still some audio in the left channel. This is only true for the assigned outputs in the mix rack. The phones output and the AFPL bus (not controlled by fader) works correctly.

    /Henric Isén, Sweden

    Profile photo of Scott A&H
    Scott A&H

    Thank you for your post. Yes, this is a bug we are currently rectifying and should be resolved by the next firmware release.
    Scott A&H

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.