Adding Routing tab to send Mixes to Mains

Forums Forums Qu Forums Qu feature suggestions Adding Routing tab to send Mixes to Mains

This topic contains 20 replies, has 6 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 5 years, 9 months ago.

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • #55177
    Profile photo of Andreas
    Andreas
    Moderator

    I somehow doubt A&H is willing to implement such an official “Thru FX” without getting rid of that mSec delay from that routing path (not sure if it would be possible at all).
    Using that “flat” Phaser keeps the workaround-with-known-issues Status and reminds us to not mix that path with the original signal.

    #55178
    Profile photo of
    Anonymous

    Well never say never 😐
    Maybe they could rename the ‘through Efx’ rename it and when used activates the routing page to pop up.
    It is software driven. Not hardware.

    #55179
    Profile photo of Andreas
    Andreas
    Moderator

    …but Software runs on Hardware which can’t expand free in any direction. Real group functionality needs a zero delay or at least delay-compensated path from inputs through the group back to LR, maybe that required piece of hardware resource simply does not exist on Qu16.
    Sure, never say never. 😉

    #55183
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Maybe make it a pure delay FX, with a minimum value of 1msec – that would really remind us, but still allow for various useful groupings (e.g for things where you don’t run a second path, so the delay isn’t an issue)

    #55193
    Profile photo of Andreas
    Andreas
    Moderator

    I didn’t came close to flat using a Delay, basically since minimum Delay time is 5mSec.

    #55196
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Ouch

Viewing 6 posts - 16 through 21 (of 21 total)

You must be logged in to reply to this topic.