Adding QU Drive tracks

Forums Forums Qu Forums Qu general discussions Adding QU Drive tracks

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Chris Chris 9 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #46177
    Profile photo of Chris
    Chris
    Participant

    Hi, Once one has recorded a track in multitrack mode to the QU drive, can one subsequently record additional track(s) (on different channels) without losing the first one? i.e. can the QU drive replay a track at the same time as recording some new ones? It would be so much easier just to snap a few tracks rather than power up the DAW and wait for a million updates….

    #46184
    Profile photo of mervaka
    mervaka
    Participant

    You’d need to use USB-B and a DAW for that.

    #46190
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    Nope, but you could load the L&R recording to another media player and record again – the L&R signal would allow you to line up the two set of recordings, but the samples wouldn’t be perfectly lined up.

    #46216
    Profile photo of Chris
    Chris
    Participant

    Ok, thanks Bob & Mervaka. Seems like it would be a good improvement, after all a DAW can do it easily on discs and processors that are doing 20 other things at the same time 🙂

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.