Adding Extra SLink Card for ME System and DX168 Connection

Forums Forums SQ Forums SQ general discussions Adding Extra SLink Card for ME System and DX168 Connection

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Brian Brian 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #119901
    Profile photo of esther
    esther
    Participant

    Hi everyone,

    My goal is to connect the ME Personal Mixing System, and the DX168 on the SQ7.
    I was thinking having the on board SLink connected to the DX168 and adding a extra Slink for the ME system. Does anyone have experience on this or any suggestion on such configuration?

    #119902
    Profile photo of Brian
    Brian
    Participant

    There are basically two choices. Add an S-Link card in the I/O slot to attached the second device to as you are suggesting, or use a GX4816 stage box instead of the DX168 box. That stage box actually has both local I/O and a ME port built in.

    Either choice will work fine. Obviously the GX4816 option is going to be more expensive initially, but it also leaves the I/O slot open for any future use (like adding a Dante or Waves card).

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.