Add a few more MIDI monnads for custom remote control

Forums Forums SQ Forums SQ feature suggestions Add a few more MIDI monnads for custom remote control

This topic contains 6 replies, has 7 voices, and was last updated by Profile photo of ioTon ioTon 3 years ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #92097
    Profile photo of jonathansp
    jonathansp
    Participant

    Hi Everbody,

    have you already planned to add more commands for MIDI remote control?

    For QU there are a lot more commands implemented:
    https://www.allen-heath.com/media/Qu_MIDI_Protocol_V1.9.pdf

    I’d like to have commands for
    – Input Channel source
    – Insert In/Out
    – Channel Names (and Coloring)
    – PAFL Select (of mix)

    And one more command i liked from my GLD:
    – Mix Select (Like pressing the keys on the right side for send levels)

    Thanks a lot!

    #97051
    Profile photo of nottooloud
    nottooloud
    Participant

    +1

    #98813
    Profile photo of William
    William
    Participant

    +1 Would especially love to be able to use all knob in midi. Eq knobs, pan, comp gate etc and color labling

    #98986
    Profile photo of MaxKiusso
    MaxKiusso
    Participant

    +1

    – with feedback / get status for all commands

    #99028
    Profile photo of vinz
    vinz
    Participant

    +1

    #99264
    Profile photo of jc2000
    jc2000
    Participant

    +1

    PLEASE add at least midi out for channel select and mix select buttons. The more the better!

    #99273
    Profile photo of ioTon
    ioTon
    Participant

    +1
    -> select function via midi!!
    I use a midi faderwing as extension and want to select the channels on that board!

    would be nice:
    -> selected channel processing
    To have full hardware compressor control or something similar.
    The touch&turn for every parameter is not the fastest solution…
    I like deticated knobs for every function…

    Hope this dream will get someday true… 😉
    Midi issues 99 😉

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.