Actions – Insert changes for Auxes, and Send/Return patch changes

Forums Forums dLive Forums dLive feature suggestions Actions – Insert changes for Auxes, and Send/Return patch changes

Tagged: , ,

This topic contains 6 replies, has 3 voices, and was last updated by Profile photo of Bob Briessinck Bob Briessinck 1 day, 12 hours ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #122895
    Profile photo of Jonathan
    Jonathan
    Participant

    Would love to be able to toggle my Waves patching In and Out, but I still have to rely on two soft key scenes for that because Actions isn’t quite powerful enough.

    Need to be able to program assign some input patches and Insert patch changes for Auxes.

    #122943
    Profile photo of Jacob
    Jacob
    Participant

    Hey Jonathan, you actually can do this with Actions and SoftKeys. In the Actions configuration, create a new action and add a new “Processing” function. Set the Mode to “Toggle”, set Channel Processing Function to “Insert A In” (could also choose the B insert, if that’s where your Waves processing is inserted), select the inputs or mixes that you’d like to be able to bypass, then tap apply. Assign the Action to a SoftKey using the “Action Recall” function. Based on my testing in Director 2.0, you’ll want to set the SoftKey Mode to “Recall”. Now when you tap the SoftKey, it will toggle between the insert states.

    #122944
    Profile photo of Jonathan
    Jonathan
    Participant

    Hi Jacob. It’s actually only available for Input processing, and not Auxes or Groups. So I unfortunately can’t ditch my Waves On/Off snapshots for this just yet.

    #122950
    Profile photo of Jacob
    Jacob
    Participant

    I don’t think that’s correct. I just tested it on inputs, groups, auxes, matrixes, and mains. It works like I would expect.

    #122953
    Profile photo of Jonathan
    Jonathan
    Participant

    Ah. I see what’s happening. I’m just an idiot.

    Haha Auxes only have an Insert A and I patch all my Waves Insert B on inputs…🤦‍♂️

    I just need to add another Action line to effect Insert A for my busses.

    #122957
    Profile photo of Jacob
    Jacob
    Participant

    Oh, good catch! I didn’t realize that.

    #123189
    Profile photo of Bob Briessinck
    Bob Briessinck
    Participant

    Damn, didn’t see this either! Nice one.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.