AB168 rack mounting

Forums Forums GLD Forums GLD general discussions AB168 rack mounting

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of TobyDE TobyDE 6 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #45564
    Profile photo of TobyDE
    TobyDE
    Participant

    Hi,

    are there any pictures of the rack mounting option for the AB168? How is it mounted, what about the connections on the side?

    Best regards from Germany,
    Toby

    #45581
    Profile photo of eotsskleet
    eotsskleet
    Participant

    https://images.static-thomann.de/pics/prod/344400.jpg

    It’s asymetrical mounted to leave space for the connection! But it’s rather made for on-stage without case!

    #45601
    Profile photo of John-S
    John-S
    Participant

    Is your idea to protect the AB168 while transporting? May I suggest you buy a case it slips inside of without mounting. There will be no need for padding inside this case. It will be cheapest and you get all the intended benefits of its design.

    John

    #45605
    Profile photo of TobyDE
    TobyDE
    Participant

    @john-s
    It’s about protection, storage and handling. I would prefer another AR2412 but you cannot connect more than one in one (GLD) system 😉

    @eotsskleet
    Thanks, I will go with the rack mount solution as there seems to be enough space for the side connections.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.