AB-168 and QU attached to SQ at the same time?

Forums Forums SQ Forums SQ general discussions AB-168 and QU attached to SQ at the same time?

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Art Art 5 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #73253
    Profile photo of Barryjam
    Barryjam
    Participant

    Is this possible? Will it become possible?

    Usage would be split FOH/IEM monitor situation.

    I have QU-sb and two AB-168 currently.

    #73255
    Profile photo of Mfk0815
    Mfk0815
    Participant

    Hmm, let‘s think about it. You connect the dSnake Connector of the SB to the first Ab168, then the second Ab via cascade to the first one. Now it is not possible to connect another device to the cascade port of the second AB. Ok, and how would you connect now the SQ to the SB? Hmmm.

    #73266
    Profile photo of Art
    Art
    Participant

    You will need to wait for the SLink card for the SQ. Once you have that, you can connect both AB168’s to the SQ and connect the SQ to the QU-SB, routing all I/O from the SQ to the QU-SB, with the QU-SB set as the clock source on the SQ.

    Here’s the video on how to patch both systems.

    http://support.allen-heath.com/index.php?/Knowledgebase/Article/View/1188

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.