6 dB/oct HPF on inputs

Forums › Forums › Avantis Forums › Avantis feature suggestions › 6 dB/oct HPF on inputs

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/03/11 at 4:33 pm #111936
    Profile photo of HuBandiTHuBandiT
    Participant

    I would like a 6 dB/oct slope (first order) high pass filter on input channels.

    Attachments:
    You must be logged in to view attached files.
    2023/03/25 at 8:43 am #112132
    Profile photo of YvoYvo
    Participant

    I wouldn’t mind that, especially because the shelves don’t have a slope control.
    Oh, by the way, please add SLOPE CONTROLS to the shelves!
    It really surprised me that even the 12 band EQ does’t have slope controls.

    2023/03/25 at 11:43 am #112135
    Profile photo of HuBandiTHuBandiT
    Participant

    Oh, indeed! Absolutely!

    My ideal set for EQ would be:

    • 6 dB/oct HPF with full corner frequency range (e.g. 20 Hz to 20 kHz); ideally this would be the HPF on the PEQ screen, that is this would be in addition to the current HPF on the Filter screen
    • 6 dB/oct shelf filter
    • gain range down to −25 – −30 dB
    • PEQ width range increased to 4.5-5 octaves or even full width (e.g. a PEQ filter at 20 Hz would have a half-gain at 20 kHz)
    • 5 or 6 bands (8 if you can afford it)
    • allow any band to be any type; e.g. allow me to have several upper shelves

    Thank you kindly.

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.