4×8 matrix

Forums › Forums › iLive Forums › iLive general discussions › 4×8 matrix

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of eotsskleet eotsskleet 9 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2014/07/21 at 2:53 pm #40949
    Profile photo of Rob
    Rob
    Participant

    We currently us a 2×8 matrix on our L+R mains to run underbalcony, over balcony delays, recording feed, etc.

    I am looking to also add some of our ambient room mics (which are two inputs) into the recording feed output only. Is there a way to bus the two recording mics AND the L+R to the stereo recording output matrix?

    We used to do this on our analog console which had a matrix over the subgroups and mains.

    Thank you.

    2014/07/21 at 6:49 pm #40954
    Profile photo of eotsskleet
    eotsskleet
    Participant

    can’t you use a stereo-group to assign the ambient mics to it and then use the recording matrix and route the LR & StereoGroup to it?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.