4 stereo aux

Forums › Forums › Qu Forums › Qu general discussions › 4 stereo aux

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of owai owai 9 years, 12 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2014/04/30 at 8:53 am #39445
    Profile photo of Jarek
    Jarek
    Participant

    Helo,

    is it possible to link two mono aux to have one more stereo aux?

    Thanks, dump6

    2014/04/30 at 8:58 am #39446
    Profile photo of eotsskleet
    eotsskleet
    Participant

    No, maybe you should write a feature request if needed! Another Solution is the ME-1! (But costs something..!)

    2014/04/30 at 2:33 pm #39454
    Profile photo of owai
    owai
    Participant

    he… maybe…
    what we need is to have the same settings for the 2 mono channels, nothing more? he… yes something more: the pan settings have to be left and right, but that’s a detail.
    if you build a small device that listen to all changes on aux1 and copy it to aux2, with midi over ethernet. You can see my post about an arduino remote control device…
    for the pan settings, you should write an exception, to ignore them or set them to the opposite… everything is possible

    Arduino-based remote control for QU16


    https://forum.arduino.cc/index.php?topic=230326.msg1661833

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.