2nd EQ to Compensate for Differing Microphones

Forums Forums dLive Forums dLive feature suggestions 2nd EQ to Compensate for Differing Microphones

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of tpaulding tpaulding 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #103040
    Profile photo of Dave
    Dave
    Participant

    I was just thinking that it might be neat to have another EQ section right after the preamp that lets you pick what model of mic it is and how close its being held to compensate for non-flat mic and the proximity effect. Then the regular EQ would be free to let you make “artistic tonal choices”.

    Dunno if there’s enough room in the processor to do it, so I haven’t thought much about who would supply the curves, or how one might load their own if using an obscure mic.

    #103041
    Profile photo of tpaulding
    tpaulding
    Participant

    Have you tried using a DYN8 on insert A? It might work well for you in this application. We do this some when we don’t route a channel also through Waves Super Rack.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.