Issue – AUX not following mute

Forums › Forums › iLive Forums › Archived iLive Discussions › Issue – AUX not following mute

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/08/17 at 3:00 pm #23935
    Profile photo of Anonymous
    Inactive

    Hi guys,

    I have encountered this issue on 2 different consoles. Both with 1.9x latest firmware.

    Whenever a channel has an input socket assigned from the surface. And a pre-fader aux is turned up on that channel, even if you Mute the channel, it still passes signal to the aux.
    I also tried post-feader aux and it still passes signal to the aux output even if the channel is muted and fader is down.

    Can someone else confirm this.
    It was done on a T112 system

    Gil Parente
    Design & Integration
    Entertainment Arts, Inc.
    iLive 176, T112
    iDR48 , iDR16, iDR10
    Multiple iPads
    Dante
    Etc..

    2013/08/18 at 6:13 am #34652
    Profile photo of sraymondsraymond
    Participant

    The only time I’ve seen something like that is if I didn’t realize I had two channels patched to one input. If turning down the aux send on that channel removes the signal it looks like something is screwy in firmware or hardware land. Definitely not good!

    Scott

    iDR 32
    iDR D-Out
    MMO
    Lenova T61, M90, iPad2

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.