Copy Input Channels in Bulk

Forums › Forums › iLive Forums › Archived iLive Discussions › Copy Input Channels in Bulk

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/08/16 at 12:05 pm #23933
    Profile photo of AcidpreacherAcidpreacher
    Participant

    Hi – apologies if I’ve missed this but I searched and could not see any previous advice.

    I just want to copy all settings from Ch 1-16 to Ch 17-32 and then to 33-48 and 49-64 as a start point for some independent IEM channels for OneMix (I saw from a previous post this was advocated to ensure individuals do not adjust FOH EQ etc.)

    I know I can copy processing settings one by one… AND
    I can use the Quick Input mapping in setup mode to quickly create the physical inputs -> Channel mapping BUT

    Is there a way to just select Ch1-16 and “drop” (or cut and paste) all of their settings over to 17-32 etc..

    Sorry if this is obvious but haven’t managed to work it out.

    Thanks, Ric

    Richard

    2013/08/18 at 7:59 pm #34654
    Profile photo of AcidpreacherAcidpreacher
    Participant

    Anyone? I’m happy to get on with it if it’s not possible but didn’t want to spend more time than needed if there was a shortcut :-)

    Thanks, Ric

    Richard

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.