Routing screen L/R?

Forums › Forums › GLD Forums › Archived GLD Discussions › Routing screen L/R?

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of jcarter jcarter 10 years, 8 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2013/08/10 at 7:22 pm #23921
    Profile photo of MattLW
    MattLW
    Participant

    Hi,

    Just noticed in the routing screen on the channel strips there is an on/off for all the aux/fx/groups etc assign, but I can’t see a L/R on/off?

    e.g. if assigning inputs to groups on the routing screen I’d want to be turning off the L/R assign, seems odd to have to go back to the surface to do that

    Am I missing it?

    Cheers,

    Matt

    http://www.lite-works.co.uk

    2013/08/10 at 7:29 pm #34610
    Profile photo of Chris93
    Chris93
    Participant

    I agree. [:)]

    https://iliveforum.allen-heath.com/topic.asp?TOPIC_ID=2721

    Chris

    2013/08/10 at 7:34 pm #34611
    Profile photo of MattLW
    MattLW
    Participant

    Ah, so I’m not being blond then!

    I can find it by going to the L/R bus channel strip, but as you say in your previous post: “Why not have it all on the same screen”. I agree!

    Cheers,

    matt

    http://www.lite-works.co.uk

    2013/08/10 at 8:58 pm #34612
    Profile photo of jcarter
    jcarter
    Participant

    There’s always the option of using a stereo group for your mains, I guess.

    Agree that not having L/R available in the input routing screen is a pain. I basically do *all* my routing from the touchscreen…

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.