Topic: need help, idr10 network problem | Allen & Heath Digital Community

need help, idr10 network problem

This topic contains 3 replies, has 2 voices, and was last updated by david_herl 10 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2013/06/16 at 4:02 pm #23828

david_herl
Participant

Hi guys,

here’s the situation:

I have a wireless access point EnGenius ECB9500 connected via 1 meter long cat5e cable to idr10.

idr10 is using v1.90 firmware.

I am using for OneMix app only. There are 3 ipads connections, and T112 Surface.

Somehow OneMix app lost its connection to the mixrack after every about 15 minutes of idle..

I checked my ipad to wireless access point/ router connection, it was fine.
I put the router & mixrack at the stage, so distance & signal strength are not the issues.

I had to close the app and re-open to get it to work again. I set the auto-lock to ‘Never’

IP address of mixrack, surface, touchscreen are default settings.

wireless AP is 192.168.1.254

DHCP range is 192.168.1.100 – 192.168.1.200

Please help

2013/06/18 at 12:10 am #34254

gilparente
Participant

Is your DHCP set to renew lease every 15 min?

Gil Parente
Design & Integration
Entertainment Arts, Inc.
iLive 176, T112
iDR48 , iDR16, iDR10
Multiple iPads
Dante
Etc..

2013/06/18 at 1:05 am #34255

david_herl
Participant

I’ll check later today, but I remember I set the channel selection to ‘auto’ with
half an hour period of changing -> the router will look for the clearest channel every half an hour and change into that channel.

Does this also affect the stability besides the DHCP lease time?

Thanks

quote:

Originally posted by gilparente

Is your DHCP set to renew lease every 15 min?

Gil Parente
Design & Integration
Entertainment Arts, Inc.
iLive 176, T112
iDR48 , iDR16, iDR10
Multiple iPads
Dante
Etc..

2013/06/20 at 5:00 pm #34275

david_herl
Participant

Hi all

I checked. DHCP lease time is set to ‘forever’.

However I did several things:

1. Disable CTS Protection on router
2. Upgrade iLive firmware to v1.91.

Everything works flawlessly now. No drop outs.

However, the metering didn’t work in OneMix.

Pls help (again)

Thx
Author

Posts