Sync GLD-80 with Dante and Mac

Forums Forums GLD Forums Archived GLD Discussions Sync GLD-80 with Dante and Mac

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Sound Doctor Sound Doctor 10 years, 9 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #23799
    Profile photo of Mike-Mullin
    Mike-Mullin
    Participant

    Hi Folks,
    Would you care to share your Clock and sample rate setup. I have a GLD-80 recording great into Digital Performer via Dante. It also plays back recorded files.
    The difference is recording is clean and solid with no clock issues. Playback however has lots of clock/sync noises which I cannot figure out the cause of .
    Any thoughts ?
    cheers
    Mike Mullin

    #34124
    Profile photo of Chris93
    Chris93
    Participant

    Where is the GLD set to get its clock source from?

    Chris

    #34136
    Profile photo of Mike-Mullin
    Mike-Mullin
    Participant

    The GLD is set to internal sync.

    #34142
    Profile photo of Sound Doctor
    Sound Doctor
    Participant

    Mike:
    It would seem to me you should set Digital Performer to slave as GLD is master. Try that and see if the pops and clicks go away,,,,

    Rick
    GLD80
    AR2412
    AR84

Viewing 4 posts - 1 through 4 (of 4 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.